Crane is the main equipment for lifting and hoisting in large factories and workshops, commonly used in large manufacturing workshops such as metallurgy, papermaking, and building materials. In large workshops, there are usually multiple overhead cranes working on the same track at the same time, which results in heavy workload. Due to delayed braking, collisions between cranes often occur, seriously affecting the production efficiency of the enterprise and even causing employee safety accidents.
The anti-collision device of the overhead crane measures the distance between overhead cranes on the same track in real time, and can also detect the distance between the overhead crane and the track end in real time. It sets a safety alarm distance, controls the deceleration or stop of the overhead crane, and promptly notifies the driver to pay attention to the distance between the overhead cranes. It is an important safety equipment that cannot be lacking in the safe production of overhead cranes. The Beixing single point LiDAR module has a wide range of product models, which are not affected by interference sources such as ambient light. The maximum range model has a detection distance of up to 350m, a measurement accuracy of cm level, and a maximum detection frequency of 1000Hz. It is designed for pure industrial scenarios and has an IP65/67 protection level, which can provide stable and reliable ranging results for overhead crane anti-collision devices.
Core Highlights
1. Meet high-speed operation scenarios, with a default detection frequency of 100Hz and a maximum configurable frequency of 1000Hz, providing rapid and timely response;
2. Output real-time distance values and signal strength values, with simple data analysis and more reliable processing when combined with strength values;
3. Rich interfaces, supporting multiple data interfaces such as UART/I ² C/4-20mA/RS-232/RS-485;
4. Strong anti-interference ability, with an environmental light resistance of 100Klux;Strong adaptability, no requirements for reflectors, no need to install additional high reflectivity reflective plates;
5. Small FoV, low false alarms, accurate distance measurement, small size, easy to integrate into the interior of the vehicle.
